Siri Flex 3 Carriage for the Guide 3 Rail

If you have the SIRI CUT 3 system for cutting large format tile, but:
– the tile will not score with the wheel, for one reason or another;
– you need cuts that do not run the full length;
– you need a 45 mitre;
– you need a convex, rounded chamfer;
– you need to grind the tile edge,
then the SIRI FLEX 3 carriage is what will help you
The SIRI FLEX 3 is a system for cutting large format ceramic, porcelain and marble slabs. It lets you make straight cuts, cuts at 45° and half-round edge profiling. It consists of a sliding carriage for an angle grinder with a diamond blade, and it has to be used with one of the available Siri Guide 3 rails. Thanks to four ball-bearing pulleys the SIRI FLEX 3 is very stable and slides easily along the rail, and it also has a tilt mechanism for adjusting the depth. This one-of-a-kind system has millimetre adjustment of the cut line. The SIRI FLEX 3 fits most angle grinders on the market and is intended to be used with a vacuum.
Made in Italy