Shijing 3761 Manual Tile Cutter, 1650 mm

Shijing 3761 tile cutter, L = 1650 mm
The Shijing manual tile cutters of the 3721, 3751 and 3761 series are the flagship cutters of this brand. It is their own original design, so let me go through the details:
– the 3721 and 3751 cutters have rails made of thick-walled tube (3 mm), 40 mm high and 19 mm wide;
– the 3761 uses a solid 20 x 40 mm rail (metal all the way through);
– it has a really nice side stop, which most tilers like and treat as a reason to buy;
– the cutters allow the rail tilt to be adjusted and even the straightness of the rail to be set;
– it is a push-type cutter, the break is made by pressing down gradually;
– the handle can be adjusted to set the cut running dead straight;
– the carriage rides the rail on a good number of bearings that bear on the rail from every side. The bearing preload can be adjusted;
– the bearings track the rail correctly, which extends the life of the rail;
– the breaker works along the whole length;
– fitted with a powerful green laser running off a battery;