Raimondi BC 45 Chamfer Slider

Raimondi BC 45 slider 433BCOH US
A device for cutting at 45° to get a finished edge right there on the job (the actual cutting angle is 47 °)
The work is done by sliding: the BC45 rests on the edge of the slab, which makes the job fast and accurate and lets you work with no limit on length.
Plastic runners protect against scratches and give the best possible smoothness on the slab.
Maximum slab thickness: 16 mm with a Ø 115 mm blade; 20 mm with a Ø 125 mm blade.
The two handles are shaped so that it is easy to apply the pressure needed along the whole length of the angled cut (entry, side of the slab, exit), which guarantees both the best results and the best ergonomics.
The cutting depth is set by turning special screws, which let you dial in how much material is to be removed. Once set, it stays the same whatever the length of the slab.
Blade tilt adjustment: by acting on a screw you can tilt the blade to prevent chipping at the edge of the tile.
Compatible with practically all angle grinders from 600 to 1100 W.
Suits angle grinders with an M14 stepped shaft, art. 433BCOH EU
The angle grinder is not included.
It can be used both for dry cutting with a vacuum cleaner and for wet cutting with water cooling using art. 433PWW A