Grabo Pro Cordless Vacuum Lifter

— this is the next generation of vacuum lifters and the newest addition to the GRABO range. Ergonomic design for a comfortable grip and less fatigue while moving heavy objects; the GRABO Pro has a smart digital pressure sensor, a digital display and intelligent weight and pressure settings. With the accessory straps the Grabo can be used to lift, move and transport household appliances, furniture, crates and entertainment systems.

The Grabo Pro has an automatic on/off switch that monitors and holds the optimum suction, cutting in and out as needed. The smart digital sensor gives you a visual reading of the grip – the maximum weight in kg that the Grabo Pro can safely lift at that moment.

It comes complete with a tough zipped case, the standard seal, a battery and a charger.

Model/SKU GRABO Plus / GRAB220
Battery 14.8VDC 2600mAh Li-ion
Rated power 16 W
Charger input voltage 100-240 V AC 50/60 Hz (not supplied) approx. 1500 on/off cycles
Battery charge time ~2 h
Continuous run time (full charge) 1.5 h
Working cycles (on a full charge) 900 on-off cycles of 10 seconds
Standby (charge retention) 30 days
Maximum vacuum level: -0.7 bar (-70 kPa)
Pump service life 100000+ on-off cycles / 800+ hours of continuous running
Rated air flow 20 l/min
Maximum vacuum level 10.8 bar, 80 kPa
Maximum lifting capacity 170 kg
L x W x H 300 x 184 x 121 mm (11.77 x 7.22 x 4.76 in)
Net weight (with battery) 1.5 kg
Operating temperature 0°~60°C
Applicable surface type Peak/valley height less than 3 mm , curvature less than 5°
Extra functions The pump stops automatically at maximum vacuum
speed (11.6Psi / 0.8 bar)