StoneCraft Butterfly Rotary Blade, 45×0.6 mm with Shank

Diamond disc Stonecraft BUTTERFLY Ø45×0.6×6 mm with shank Ø3 mm for precise stone cutting

Description:
Professional diamond cutting disc Stonecraft BUTTERFLY with a diameter of 45 mm, a thickness of 0.6 mm and a landing of 6 mm, mounted on a shank Ø3 mm, a height of 35 mm.

Designed for high-precision cutting of porcelain stoneware, ceramics, granite, gabbro, labradorite, dekton, sandstone, basalt, quartzite, travertine and other hard materials.

Features:
Type: diamond disc with a shank (collet mount, for engravers, dremels, drills);
Disc diameter: 45 mm;
Disc body – sintered diamond segment;
Thickness: 0.6 mm;
Landing hole: 6 mm;
Shank diameter: 3 mm;
Shank length: 35 mm;

Mandatory cooling: work with water cooling (to extend the resource and cleanness of the cut);

Purpose: wet cutting of stone, tiles, glass, porcelain stoneware, dekton, basalt, marble, etc.;
Type of cut: thin, clean, without chips.
Maximum cutting depth 16 mm. To preserve the resource of the disc and preserve the properties of the diamond segment, it is recommended to make deep cuts in several passes.

Advantages:
High accuracy due to a thin diamond layer
Low thickness reduces the load on the material and prevents overheating
Compatible with most hand engravers and drill machines (Dremel, Proxxon, etc.)
Ideal for small jobs, jewelry cutting, restorations and tile adjustment
Attention!
When using, it is necessary to install the disk in accordance with the direction of movement indicated on the disk body and ensure sufficient water cooling of the blade.
It is forbidden to work with this disk with a side load, i.e. cutting at an angle, this can lead to disk breakage and operator injury
Before starting work, make sure that the disk is securely fixed on the shank or on the spindle
Do not exceed the recommended speed – 16,000 rpm
It is forbidden to work with the disk without protective glasses and it is recommended to wear protective gloves
It is forbidden to work dry – use constant water cooling
Do not use a disk with damage or cracks
Hold the tool steadily, without lateral pressure